Now that the hard part is over, it’s on to the drudgery of re-installing everything. Of course the first thing you’ll need to do is re-install the operating system from scratch.
To do that, after you start your computer with your boot floppy inserted into the floppy drive, you'll need to make sure you have the Windows 95, 98 or ME CD in your CD/DVD-ROM drive. Once it's there, just type the following at the A:\ DOS prompt you should see when the boot process finishes. Hit the Enter key at the end of it. (Note that you may have to type a letter other than "D" if your CD/DVD-ROM is assigned to a different drive letter.)
D:\Setup.exe
On a freshly formatted drive this process should go smoothly, but be prepared with any drivers or driver upgrades you have available on floppies or CDs. As Windows goes through the Plug-and-Play process of detecting your computer’s hardware and then attempting to install drivers for it, the OS should give you very clear signs whenever it needs input (or disks/discs) from you.
If you want to, you can create a directory on your hard drive called Win95CAB or Win98CAB and then copy all the compressed .CAB (or cabinet) files you’ll find on the Windows 95/98 CDs (in the Windows 95 or Windows 98 folders respectively) into those directories. It takes a fair chunk of hard disk space—around 100 Mbytes or so—but it saves you from having to look for your Win 95 or Win98 CD down the road if you ever install anything and the installation process asks for the CD. Instead, you can just direct it to the CAB files on your disk and you’ll be all set. Thankfully, Windows ME does this for you automatically.
If your PC comes with a program that automatically returns it to its factory fresh state, you’ll use that to install your OS instead. Doing so should automatically take care of installing the OS and applications that came with your computer. If you have any updated drivers or applications as part of your backup, however, you’ll have to re-install those manually, as explained a bit further down.
If you have trouble during the installation, it could be that one of you drivers is out-of-date. If so, you’ll want to check the manufacturer’s web site for an update (see the "PC Hardware Troubleshooting Tips" article for more). Once the OS installed, you should run any other driver installation programs you have. Occasionally these types of programs will tell that you need to reboot for the changes to take place. When you’re going through this re-install process I highly recommend you take their advice for each program that requires it. Even though constantly rebooting adds even more time to the process, it can be worth it in the long run. The reason is if you install multiple pieces at once that make changes to your system, those changes could conflict or counteract each other. Because the purpose of this exercise is to get everything working properly, you’re better off taking the conservative route here and letting each piece "take hold" one at a time.
Once all your drivers are done, it’s time to reinstall the apps. Again, if at the end of the install the program says it needs to restart Windows for the changes to take effect, I would restart. The order that you install the applications in typically doesn’t matter, although I would probably install any that had been causing you problems first. Once the main apps are in place, you need to reinstall all those lovely Service Packs, bug fixes and other updates that you painstakingly backed up in Step One. Remember also that some updates and Service Packs can only be done after a previous update to the same program has been made so make sure you do them in the proper order.
Before copying over your own data, I suggest you try running a few of your favorite applications to make sure everything is working properly. In addition, make sure you double-check any previously problematic programs once everything has been installed. If a problem crops up now, it’s probably due to a software conflict with another application on your system. If that’s the case, you’ll need to check web sites for updates and see if that helps (see the "PC Software Troubleshooting Tips" article for more).
Finally, after all the applications have been installed, it’s time to copy back over all your own data. If you haven’t already, I suggest you take advantage of this re-installation process and use the opportunity to organize all your data files in a single location, such as the My Documents directory. You don’t want to put everything at the main level of the My Documents directory, however, or you’ll be overwhelmed. Instead, to make that directory useful, you should first create sub-directories inside it and then use those directories to store your various types of files.
Step 5: Enjoy
When everything has been restored, it’s time to enjoy your new machine. Well, almost. Though it shouldn’t make any difference, it’s probably worthwhile to double or triple-check any problem applications (you know—the ones that led you to take on this procedure in the first place) after you restore your own files.
Once you’re confident that things are working well, you can take yourself and your PC back on a second (or third or fourth) technological honeymoon and get to know each other all over again.
No comments:
Post a Comment